The procedure for connecting construction objects to the electrical network is determined.
APA reports that this was reflected in the proposed amendment to the law "On Electric Power", which was discussed at today's session of the Milli Majlis.
According to the project, the construction objects are connected to the electric network or receive additional energy (power) based on the connection contract, and the customer is given a technical condition that is part of the contract.
The procedure for calculating the power required for construction facilities is approved by the body (institution) determined by the relevant executive authority.
For the connection of construction facilities to the electric grid, the customer pays the energy supply enterprise or the state electric power enterprise for the connection service in accordance with the procedure provided for in this article.
For the connection of household subscribers and existing or future construction facilities with a required power of up to 150 kW (including 150 kW) to the existing 0.4 kV network, payment is made by the customer for the connection service, and the preparation and construction of the energy supply project - installation works are carried out by the energy supply company.
If there is no 0.4 kV network in the area where these construction objects are located, their connection to the energy supply network or receiving additional energy (power) is carried out in accordance with the fifth part of this article.
The customer pays for the connection service for the connection to the electric grid of the existing or to be built construction facilities with a required power of up to 150 kW (from the medium and high voltage network) and above 150 kW, as well as the construction facilities of electricity distributors and producers, and the preparation of the energy supply project and the construction and installation works from the construction facilities to the point of connection to the electric network are carried out at the customer's expense by the contractor chosen by the customer (only the contractor in relation to electricity producers), or by the energy supply enterprise or the state electric power enterprise.
The connection point is determined at the substation, transformer station, power line, distribution board located at the closest distance to the construction facilities (except for the construction facilities of energy producers that produce electricity).
Building facilities of energy producers that produce electricity are connected to the connection point (substation or power transmission line) that is suitable in terms of voltage level and power grid capacity and is located closest to the power plant.
The connection point at the transformer station, power line and distribution board owned by another consumer must be agreed between the new subscriber and that owner.
All work required to strengthen the electrical network at the connection point is performed by the enterprise providing the technical condition at its own expense (except for the case of connecting the electric power distributor to the electrical network of the building object).
When the electric power distributor is connected to the electric power network of the building object, the electric power network is strengthened at the connection point at the expense of the relevant electric power distributor.
The fourth and fifth parts of this article refer to the existing or to be built construction facilities in the areas where spatial planning documents have been approved.
The connection of construction objects to the electric network in the areas where territorial planning documents have not been approved is carried out in accordance with the fifth part of this article.
The bill was put to a vote and adopted in the third reading.